Note: The details given in this data sheet are our standard value but not specification guaranteed.
| Typical Properties | FM090 | FM270 | ||
| Properties | Unit | Test Method | Typical Value | Typical Value |
| Melt Index | g/10min | ASTM D1238 | 9 | 27 |
| Specific Gravity | ASTM D793 | 1.41 | 1.41 | |
| Rockwell hardness | M刻度 | ASTM D785 | 80 | 80 |
| Flexural Strength | kg/cm2 | ASTM D790 | 950 | 950 |
| Flexural Modulus | kg/cm2 | ASTM D790 | 26000 | 26000 |
| Tensile Strength (at yield point) | kg/cm2 | ASTM D638 | 620 | 620 |
| Tensile Elongation (at break point) | % | ASTM D638 | 60 | 45 |
| Izod impact Strength (V-notched) | kg/cm2 | ASTM D256 | 6.5 | 5.4 |
| Water Absorption | % | ASTM D570 | 0.22 | 0.22 |
| Flammability | UL94 | HB | HB | |
| Mold Shrinkage (3mmt, 4in disk) | % | 1.8-2.2 | 1.8-2.2 | |
| Heat Delfection Temperature 4.6 kg/cm22 | °C | ASTM D648 | 110 158 | 110 158 |
| linear expansion factor | cm/cm°Cx10-5 | ASTM D696 | 8.45 | 8.45 |
| Melting Point | °C | ASTM DSC | 165 | 165 |
| Vicat Softing Temp | °C | ASTM D1525 | 162 | 162 |
| Volume Resistivity | Ω cm | ASTM D257 | 1X1014 | 1X1014 |
| Surface Resistivity | Ω | ASTM D257 | 1X1016 | 1X1016 |
| Dielectric Constant | 50HZ 1KHZ 1MHZ | ISO IEC250 | 3.8 3.8 3.8 | 3.8 3.8 3.8 |
| Dielectric breakdown Strength (2mm) | KV/mm | ASTM D149 | 24 | 24 |
| Features | Standard-flow Minimai mold deposit high toughness | High-flow Minimai mold deposit | ||
| Application | buttons and press-in fasteners Plumbing and hardware Household appliances parts Other injection parts Gears Electronic parts Automotive Bearing | press-in fasteners Household appliances parts Electronic parts Other small mechanical parts Zippers Gears Automotive | ||